HID FARGO HDP5000 User Guide - Manual (Page 87)

July 2013 Page 87 of 100
© 2012, 2013 HID Global Corporation. All rights reserved.
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Step Procedure
9 From within the Security Imaging Design
Template, right-click the
Text box for the
Options shown.
10 Follow the same instruction as above for the
backside of the card.
11 Save this template using
File > Save.
Close the Workbench. (
Note: Any Software
program file printed with the YMCFK ribbon
installed into the printer will print this design
with the F panel of the ribbon. It will print the
same file each time unless you recreate a
new template.)
12 Set the ribbon for YMCFK in the Printing
Preferences. (
Note: In addition, use the
Auto Detect button. Install the F panel
ribbon for this process to work.)
13 Check
Dual Pass for printing the F panel on
a separate InTM Film panel from the YMC
image. (
Note: Use the default Dual Pass
option if using the fluorescent image in
places where also using other dye, or any
time selecting the
Invert F-panel Image.)
14 Check
Invert F-Panel Image to create a
negative of the fluorescent image. (
Note:
This may improve the look of the person’s
image if used for the Logo.)