7 defining the area to activate the card grid – HID FARGO HDP5000 User Guide User Manual

Page 60

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0

Page 60 of 100

July 2013

4.14.7 Defining the Area to activate the Card Grid

Step

Procedure

Select on the appropriate

Defined Area (see below) to activate the card grid in the upper half of the

window.

• It is through this card grid that up to five areas can be defined, as shown below.
• When the card grid is first activated, then a small black square will appear at its default size of .2 x

.2 (5mm x 5mm) and at its default location in the lower left-hand corner (0,0). (

Note: This square

represents the first defined area.)

4.14.8 Selecting the Print YMC under the K and Print K Only options

Step

Procedure

Use the

Defined Area function.

a. Define another area by clicking on the

Defined Area. (Note: Another .2 x .2 (5mm x 5mm) area

will appear in the lower left-hand corner. This is the location in which all newly defined areas will
first appear. Up to 5 areas can be defined.)

b. Delete an area by selecting the area and clicking on the

Delete button. (Note: If all areas are

deleted, the K Panel Resin options will automatically be deselected.)

Select the

Print YMC Under K option to print all black in the designated Defined/Undefined areas with

the Yellow (Y), Magenta (M) and Cyan (C) Ribbon Panels directly beneath the resin black (K) Panel.
(

Note: Select this option if printing resin black text or barcodes onto a colored background to provide a

more gradual transition between the two.)

Select the

Print K Only option to print all black in the designated Defined/Undefined areas only with

the resin black (K) Panel or to print resin black onto a white background to maximize the sharpness of
printed text and barcodes.