HID FARGO HDP5000 User Guide - Manual (Page 24)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 24 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
4.7.3 Image Darkness
Use the Image Darkness Setting to adjust the overall darkness of the printed image by
increasing or decreasing the amount of heat used by the Printhead when printing.
Step Procedure
1 Lighten the printed image by clicking or enter the exact negative value decreasing the Printhead
heat.
Darken the image by clicking or entering a positive value increasing the amount of Printhead heat.
IMPORTANT:
If the Image Darkness Setting is set too high, the Ribbon may jam or break.
Figure 4 - Image Darkness