HID FARGO HDP5000 User Guide - Manual (Page 10)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 10 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
Term Description
Locks
Hardware locks are a optional feature.
• Mechanical and key locks are used to secure the doors on the
input card cartridges, the access door to the printer, the access
door to the Laminator and the output card Hopper.
• The input card cartridges are manually secured to the printer
mechanism through the toggle latch located inside the access door
of the printer.
• The Printer and Laminator include a compatible hole with a
Kensington lock.
Memory
16 MB RAM
Operating Temperature
65º F to 90º F (18º C to 32º C).
20% - 80% non-condensing humidity
Options • Card Lamination Module – single-sided or double sided
• Flipper Module
• Magnetic stripe encoding
• Dual Input hopper
• Smart card encoding (contact/contactless)
• Contactless 13.56MHz encoding option
• Contact chip encoding option
• Door and cartridge locks
• Printer cleaning kit
Overlaminate Options
All overlaminate options are available in either clear, holographic globe
design or custom holographic design. They can also be optimized for
use with smart cards and Magnetic Stripes.
Here are the options:
• Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• PolyGuard® Overlaminate, 1.0 mil and .6 mil thick, 250 prints,
(clear, standard holographic and custom holographic)
Print Area
Over-the-edge on CR-80 cards.
Printing Method
HDP™ Dye-Sublimation / Resin Thermal Transfer