HID FARGO HDP5000 User Guide - Manual (Page 38)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 38 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
4.9.3 Using Print Both Sides - Print Back Image on Front of Card
This option becomes active when
Print Both Sides is checked. The Default is active and
unchecked.
Step Procedure
1 Select this option:
• If needing to print the first page of a two-page document
on the backside of the card.
OR
• If needing to print the resin black on the chip-side of the
Smartcard.
The second page of the document is printed on the front side of
the card.
4.9.4 Using the Dual Sided - Print Back Side Only option
Use this option to print only onto the backside of cards.
Note: The Print Back Side Only checkbox default is active and unchecked.
Step Procedure
1 Select
Print Back Side Only to print only onto the backside of
preprinted cards that must have their Magnetic Stripe or smart
card chip encoded.
Note: Load the cards in the usual fashion.
• When selecting this option, the Print Both Sides option is
automatically disabled.
• When attempting to print a two-page document (if Print
Back Side Only is selected), the first page of the
document prints on the backside of the card.
• The second page of the document is then printed on the
back of a second card.
4.9.5 Using the Options Group
Figure 16 - Options