HID FARGO HDP5000 User Guide - Manual (Page 8)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 8 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
仅适用于海拔2000m 以下地区安全使用
Use only at altitudes not more than 2000m above sea level.
仅适用于非热带气候条件下安全使用
Use only in non-tropical conditions.
环境保护(中国-RoHS)
环保使用期是基于本产品用于办公环境。
Environmental Protection Use Period is based on the product being used in an office
environment.
2.3 Technical Specifications
Term Description
Print Method
Dye Sublimation / Resin Thermal Transfer
Print resolution
300 dpi (11.8 dots/mm); continuous tone
Print Modes
There are two print modes (Performance and Normal )
• Normal print mode (default)
• Performance print mode is faster with lower image quality and is
most suitable for minimal color with mostly resin text.
Colors
Up to 16.7 million colors / 256 shades per pixel
Accepted Card Types
(Compositions)
ABS, Laminated PVC, PET, PETG, smart cards, mag stripe cards,
optical memory cards, 100% polycarbonate able to accept HDP
retransfer.
Card Cleaning
Replaceable cleaning roller (included with each print Ribbon)
Input Hopper Capacity
100 cards , 30 mil cards-standard hopper
200 cards, 30 -40 mil cards- dual-input hopper optional
Output Hopper Card
Capacity
200 card Output Hopper capacity, 30 mil – 40 mil
Reject hopper 5 cards minimum, 30 mil (with flipper module)
Card Sizes (Accepted
Standard sizes)
These Card Printers accept standard CR80 sized cards (3.370L x
2.125W / 85.6mmL x 54mmW) with a thickness of 30 mil to 50 mil
(.030/.762mm).
The Laminator will accept card thickness of 30 mil to 50 mil.
Dual Hopper limited to 30 mil to 40 mil.