Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 78)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - When a port on the AT-9410GB is set to 'auto sense' and is connected to a half-duplex
port on another device, its corresponding Duplex LED on the device image turns green instead of
orange.
Note - A GBIC image is always visible on each of the GBIC slots of the device image even if
there are no GBICs physically inserted.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The current firmware version does not allow the user to enter multiple-word values
for the System Name parameter.
Note - AT-View Plus Device Manager allows the user to enter up to 255 characters for
the System Contact, System Name, and System Location parameters but truncates them to
64 characters.
Firmware Info
Displays firmware version.
Network Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Note - The current firmware version does not save changes made to the DNS Server and
the Default Domain Name parameters.
Manager Address Info
Displays the IP address of the management station.
Device Info
Displays general information about the switch.
Note - The Security Action parameter returns '???(0)' when the Security Configuration
parameter is set to 'disabled'.
DHCP Info
Displays DHCP information including the DHCP System Group and DHCP Timer
Group.
Reset
Resets the switch.
PN 613-50665-00 Rev C Page 78 of 294