Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 219)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - The Next Hop Table sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
PIM
Join/Prune Interval
Displays the default interval at which periodic PIM-SM Join/Prune messages are to be
sent.
Interface Info
Displays the list of device's Protocol Independent Multicast interfaces.
Neighbor Info
Displays the list of device's PIM neighbors.
Note - The Neighbor Info sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Route Table
Displays the table of routes learned through PIM route exchange.
Note - The Route Table sub-menu option does not display the correct parameters. Instead,
it displays the sub-menu option name as a parameter with a value of 'noSuchName'.
Next Hop Table
Displays the table containing information on the next hops on outgoing interfaces for
routing IP multicast datagrams.
Note - The Next Hop Table sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Rendezvous Points
Displays the list of PIM information for candidate Rendezvous Points for IP multicast
groups.
Note - The Rendezvous Points sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Candidate - RP
Displays the list of IP multicast groups for which the local router is to advertise itself as a
Candidate-RP.
Note - The Candidate - RP sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
PN 613-50665-00 Rev C Page 219 of 294