Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT User Manual
Page 220
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
Component
Displays the list of objects specific to a PIM.
Note
- The Component sub-menu option does not display the correct parameters. Instead,
it displays the sub-menu option name as a parameter with a value of 'noSuchName'.
IPM
Basic Info
Displays basic information about IP Multicast Routing Protocol.
Interface Info
Displays the list of multicast routing information specific to interfaces.
Note
- The current firmware version returns 'noSuchName' for the following parameters:
o
Transmitted Multicast Octets
o
Rate Limit
o
Received Multicast Octets
o
Received Multicast Octets (HC)
o
Transmitted Multicast Octets (HC).
Note
- The current firmware version does not allow the Datagram TTL Threshold
parameter to be configured.
Scope Name Info
Displays the list of multicast scope names.
Note
- The Scope Name Info sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Scope Boundary Info
Displays the list of device's scoped multicast address boundaries.
Note
- The Scope Boundary Info sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
Route Table
Displays the table containing multicast routing information for IP datagrams sent by
particular sources to the IP multicast groups known to this device.
Note
- The Route Table sub-menu option does not display the correct parameters. Instead,
it displays the sub-menu option name as a parameter with a value of 'noSuchName'.
PN 613-50665-00 Rev C
Page 220 of 294