Agent menu – Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT User Manual
Page 44
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
Supports up to 8 stacked AT-8324 switches.
Device Manager LEDs for AT-8324
LED
State
Description
PWR
Green
The switch is receiving power.
DUPLEX Green
Orange
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
Note
- Please refer to
for the operations and behaviour of the expansion modules
installed on these devices.
Note
- The current firmware version does not allow AT-View Plus Device Manager to support
the RPS and MASTER LEDs.
Note
- When a port is configured to auto-negotiate, the current firmware version does not always
update its Port Duplex Status parameter with the correct negotiated mode. As a result, the port's
Duplex LED may show up as green when it should really be orange and vice-versa.
Agent Menu
From the Agent menu, you can view and edit the system information for the device, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Note
- Attempting to enter more than 39 characters for the System Contact, System
Name, and System Location parameters will result in the error message: "The error
occurred with 'Set' operation. Error: gen Error".
Network Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Manager Address Info
Displays the IP address of the management station.
Device Info
Displays information of the device such as Product Type, Port Count and Uplink Types
for all switches in the stack.
Reset
Resets the switch.
PN 613-50665-00 Rev C
Page 44 of 294