Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 230)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Port Menu
From the Port menu, you can view and edit MIB information about selected ports.
Utilization
Displays the port's utilization information.
Interface Info
Displays port statistics such as the number of frames received and transmitted on the port,
bytes received and transmitted on the port, and port status.
Note - The current firmware version returns '??? (117)' for the Port Type parameter.
Error Statistics
Displays error statistics for the port.
Detail Info
Port Info
Displays detailed port information such as port type, port link state and port speed and
duplex status.
Port Config
Displays configuration parameters for a particular port such as administration status and
port speed and mode.
Note - The current firmware version does not allow the Port Speed and Mode parameter
to be set to 'other'.
Spanning Tree Info
STP
Displays information maintained by every port about the Spanning Tree Protocol.
Note - The current firmware version does not allow the Administrative Hello Time and
Migration parameters to be configured.
Disable
Config
MSTP
Displays information maintained by every port about the Multiple Spanning Tree
Protocol.
Enable
Enables the port.
Disables the port.
Port Security
Displays port security configuration parameters for every port present in the switch.
PN 613-50665-00 Rev C Page 230 of 294