Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT User Manual
Page 22
Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
AT-8088/SC
Device Manager LEDs for AT-8000 Series
LED
State
Description
PWR
Green
The switch is receiving power.
MASTER Orange
Gray
The switch is the master switch of an enhanced stack.
The switch is a slave switch or is not a member of an enhanced
stack.
DUPLEX Green
Orange
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
Note
- Please refer to
for the operations and behavior of the expansion modules
installed on these devices.
Note
- The current firmware version does not allow AT-View Plus Device Manager to support
the RPS LED.
Note
- When connecting to a slave switch, AT-View Plus Device Manager does not
automatically replace the master switch image in the main window with the slave switch image.
To view the slave switch image, click on the Refresh option under the Agent menu.
Note
- AT-View Plus Device Manager will detect a loss of connection between an AT-8024GB
and an AT-9410GB when the uplink port on both devices are set to the same speed and mode.
Note
- Connection between an AT-8024GB and an AT-8324 can only be established if the uplink
ports on both devices are configured to auto-negotiate.
PN 613-50665-00 Rev C
Page 22 of 294