Bridge menu, Rmon menu, Port menu – Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT User Manual
Page 158: Bridge menu rmon menu port menu

Allied Telesyn
AT-VIEW PLUS
DEVICE MANAGEMENT
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Displays the Forwarding Database table.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but discarded
because either there was a lack of memory or the entry's aging timer expired.
Displays spanning tree parameters such as priority and cost.
RMON Menu
Displays the RMON Event log.
Note
- The current firmware version allows the Aging Time parameter to be set to a value
in the range [0-1048575] inclusive.
Spanning Tree Info
Statistics
Displays statistics about frames received/transmitted on the switch port.
From the RMON menu you can view and edit the RMON MIB.
Statistics
Displays traffic statistics in the network segment attached to each port.
History Control Table
Displays the RMON History table.
Note
- The current firmware version is unable to provide History Control Table
information. As a result, the following error message appears: "Failed to get MIB data."
Alarm Table
Displays the RMON Alarm table.
Event Table
Displays the RMON Event table.
Event Log
Port Menu
From the Port menu, you can view and edit MIB information about the port.
PN 613-50665-00 Rev C
Page 158 of 294