Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 223)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - The current firmware version does not allow the Join Time, Leave Time and Leave
All Time to be configured.
IGMP Menu
From the IGMP menu, you can view and edit IGMP information such as IGMP queries and
reports sent between devices, VLAN's IGMP functions and interfaces on which IGMP is enabled.
IGMP Config
Displays configurations of the Internet Group Management Protocol function.
VLAN Info
Displays VLAN parameters such as the maximum supported VLANs and maximum
group number per VLAN.
Interface Info
Displays the list of interfaces on which IGMP is enabled.
Note - The current firmware version returns 'noSuchName" for the Querier Up Time and
Version 1 Querier Timer parameters.
Note - Valid MIB Set values for the Row Status parameter are 'active' and 'not in service'.
Attempting to set this parameter to any other value will result in the error message: "The
error occurred with 'Set' operation. Error: bad value".
Note - The current firmware version does not allow the Proxy Interface Index parameter
to be configured.
Cache Info
Displays the list of IP multicast groups for which there are members on a particular
interface.
Note - The current firmware version does not allow the Self and Row Status parameters
to be configured.
Query Info
Displays IGMP parameters such as the current IGMP query packets which is captured by
this device, as well as the IGMP query packets sent by the device.
Group Info
Displays current information which is captured by the device provided that IGMP
Snooping and IGMP Status of associated VLAN entry are all enabled.
Note - The Group Info sub-menu option does not display the correct parameters. Instead,
it displays the sub-menu option name as a parameter with a value of 'noSuchName'.
PN 613-50665-00 Rev C Page 223 of 294