Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 231)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Deletion
Displays configuration parameters to allow port security deletion.
Displays the information that specifies the port with its traffic forward list.
Note - The current firmware version does not allow the MAC Address and Port Security
Deletion Activity parameters to be configured.
Traffic Management
Config
Displays traffic control configuration parameters for every port present in the switch.
Segmentation
Note - The current firmware version does not allow the Forward Ports parameter to be
configured.
Port Mirroring
Displays port mirroring parameters and allows configuration of port mirroring status,
destination port, Ingress source port and Egress source port.
Note - The current firmware version does not allow the Mirroring Source Port (Ingress)
and Mirroring Source Port (Egress) parameters to be configured.
QoS
Basic Config
Displays QoS parameters and allows enabling of Hol prevention status and setting
scheduling mechanism.
Scheduling Mechanism
Displays scheduling mechanism parameters.
802.1p Default Priority
Displays the 802.1p default priority table..
802.1p User Priority
Displays the 802.1p user priority class table.
User Priority Regeneration
Displays the regenerated user priorities table.
Traffic Class
Displays the traffic class table.
Outbound Access Priority
Displays the outbound access priority table.
Bandwidth Control
Displays the bandwidth control table.
PN 613-50665-00 Rev C Page 231 of 294