Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 236)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Agent Menu
Chassis Temperature Info
Opens your web browser and connects to the switch's HTTP server.
Resets the hardware and executes the default configuration file.
Performs a warm start of the software modules and executes the default configuration file.
ARP Table
Displays the mapping of IP addresses to MAC addresses (the ARP cache), on the switch.
From the Agent menu, you can view and edit the system information for the switch, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Power Supply Info
Displays information about the power supply, redundant power supply and power supply
monitoring.
Firmware Info
Displays a list of software releases installed on the switch.
File List
Displays a list of the files in the switch's file system.
Config File Name
Displays the file name of the start-up configuration file.
Displays the actual temperature of the switch and the temperature status.
Telnet
Starts a Telnet connection to the switch.
WEB browser
Note - The web browser can only contact the device if the device has a valid resource file
loaded and set, and the HTTP server and GUI on the device are enabled.
Reset Cold
Reset Warm
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
PN 613-50665-00 Rev C Page 236 of 294