Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 221)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Next Hop Table
Displays the table containing information on the next hops on outgoing interfaces for
routing IP multicast datagrams.
Note - The Next Hop Table sub-menu option does not display the correct parameters.
Instead, it displays the sub-menu option name as a parameter with a value of
'noSuchName'.
BOOTP Relay
Basic Info
Displays basic information about BOOTP relay function.
Interface Info
Displays information about specific IP address as a destination to forward BOOTP
packets to.
DNS Relay
Basic Info
Displays basic information about DNS relay function.
Interface Info
Displays the current DNS relay static.
MD5 Key Config
Displays the current MD5 key table.
Note - The current firmware version does not allow the MD5 Key parameter to be
configured.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database, discard/aging time information, spanning tree status and 802.1p.
Forwarding Database
Displays the Forwarding Database table.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but discarded
because either there was a lack of memory or the entry's aging timer expired.
Spanning Tree Info
STP Global Settings
Displays spanning tree parameters such as status and version.
MSTP Instance Info
Displays information about the Multiple Spanning Tree Protocol instance.
PN 613-50665-00 Rev C Page 221 of 294