Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 118)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
ATM Menu
From the ATM menu you can view and edit ATM information. The ATM instance submenus are
greyed out if no ATM instances are configured. The ATM channel submenus are greyed out if no
ATM channels are configured.
Instance Configuration
Displays ATM Instance configuration information.
Note - The current firmware version does not allow the following parameters to be
configured:
• Max VPC
• Max VCC
• Max Active VPI Bits
• Max Active VCI Bits
• ILMI VPI
• ILMI VCI
• Neighbor IP Address
• Neighbor Name
Attempting to configure these parameters will result in the error message: "The error
occurred with 'Set' operation. Error: noSuchName."
Channel Configuration
Displays ATM Channel configuration information.
Note - The current firmware version does not allow the following parameters to be
configured:
• Receive Traffic Descriptor Index
• Transmit Traffic Descriptor Index
Attempting to configure these parameters will result in the error message: "The error
occurred with 'Set' operation. Error: noSuchName."
Channel Error Statistics
Displays information about errors related to ATM channels.
ADSL Menu
From the ADSL menu, you can view ADSL interface information.
Line Info
Displays information about the ADSL line.
PN 613-50665-00 Rev C Page 118 of 294