Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 272)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
System Info
Displays basic system information, including system name, location, contact and
description.
Note - The current firmware version does not allow the following parameters to be
configured:
• System Name
• System Location
• System Contact
Attempting to configure these parameters will result in the error message: "The
error occured with 'Set' operation. Error: time out occured."
Device Info
Displays device information such as the application version and hardware version.
IP Interface Info
Displays network-related information such as the addresses of the default gateway and the
agents.
Configuration File List
Displays a list of all configuration files available in non-volatile memory.
Telnet
Starts a Telnet connection to the residential gateway.
RTC Menu
From the RTC menu, you can view all information related to Network Time Protocol (NTP) and
Real Time Clock (RTC).
RTC Info
Displays RTC status information including current time, offset, last update, and last delta.
NTP Server Info
Displays a list of all NTP servers available.
Port Menu
From the Port menu, you can view MIB information about the ethernet and voice ports.
Interface Info
Ethernet
Displays information for each ethernet port.
Note - The current firmware version returns 'not available' for the following
parameters:
PN 613-50665-00 Rev C Page 272 of 294