Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 211)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
AT-View Plus Device Manager detects that the established link speed is less than 1Gbps, only
the RJ-45 port images will turn green.
Note - When multiple units of the AT-9700 series are stacked together, port numbering is
continuous based on the Box ID.
• Box ID 1 - 1 to 64
• Box ID 2 - 65 to 128
• Box ID 3 - 129 to 192
• Box ID 4 - 193 to 256
• Box ID 5 - 257 to 320
• Box ID 6 - 321 to 384
• Box ID 7 - 385 to 448
• Box ID 8 - 449 to 512
• Box ID 9 - 513 to 576
• Box ID 10 - 577 to 640
• Box ID 11 - 641 to 704
• Box ID 12 - 705 to 768
This numbering scheme assumes that a unit can have a maximum of 64 ports.
Agent Menu
From the Agent menu, you can view and edit the system information for the switch, or log into
the CLI using Telnet.
System Info
Displays basic system information, including system name, location, contact and
description.
Device Info
Equipment Capacity
Displays the equipment capacity supported in the system.
Power Supply Info
Displays information about the power supply and redundant power supply .
Fan Info
Displays the fan status.
Unit Info
Displays information about the system's stacking mode, units supported in the system,
total number of ports and number of ports in use.
Unit Management Info
Displays the management information for each unit in the system.
Note - The current firmware version does not allow the Control Mode parameter to be
configured.
PN 613-50665-00 Rev C Page 211 of 294