Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 266)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
PowerBlade Modules
This section describes the modules supported by AT-View Plus Device Manager. If modules are
installed on the PowerBlade chassis at the time AT-View Plus Device Manager is called, they
will be displayed in their corresponding slots on the chassis image.
AT-PB10 Series Media Converter Modules •
AT-PB100 Series Media Converter Modules •
AT-PB200 Series Switch Modules •
AT-PB300 Series Media Converter Modules •
•
AT-PB1000 Series Media Converter Modules
AT-PB10 Series Media Converter Modules
PB13 PB14 PB15
LED State Description
ML Green The Missing Link feature is enabled
Note - The Port A Mode and the Port B Mode parameters return 'not supported' for these
modules.
Note - Active ports on PB13 and PB14 do not turn red when disabled using the Omega interface.
Note - The Link Test parameter of PB15 has a fixed value of 'hardware-link-test' and cannot be
modified.
PN 613-50665-00 Rev C Page 266 of 294