Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 214)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
IP
Interface Info
Displays information about IP interfaces.
Note - The current firmware version does not allow the following parameters to be
configured:
o
Interface Name
o
IP Subnet Mask
o
VLAN Name
o
Operation Mode
o
Secondary IP
Note - Valid MIB Set values for the Row Status parameter are 'active' and 'not in service'.
Attempting to set this parameter to any other value will result in the error message: "The
error occurred with 'Set' operation. Error: bad value".
Forwarding Database
Displays IP Forwarding Database.
Arp Aging Time
Displays the timeout period in minutes for aging out dynamically learned arp information.
Static Route Table
Displays the IP static routing table.
Note - The current firmware version does not allow the Next Hop Address, Destination
Metric and Entry Status parameters to be configured.
IP Statistics
Displays statistics about IP routing, including the number of IP datagrams received.
UDP
Listener Info
Displays information about UDP listener.
UDP Statistics
Displays the UDP Statistics.
TCP
Connection Info
Displays information about TCP connection.
Note - The current firmware version does not allow the Connection Status parameter to be
configured.
PN 613-50665-00 Rev C Page 214 of 294