Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 68)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Disable
Disables the port.
Port Mirroring
Displays port mirroring parameters and allows configuration of port mirroring state and
port's source list.
Note - Valid MIB Set values for the Port Mirroring Configuration Entry Status parameter
are 'active', 'not in service' and 'destroy'. Attempting to set this parameter to any other
value will result in the error message: "The error occurred with 'Set' operation. Error: bad
value.".
Stacking Menu
From the Stacking menu, you can view basic switch information as well as stacking information.
Stacking Info
Displays information such as Stack Switch ID, Stack Switch MAC Address, Stack Switch
Name, Stack Switch Mode, Stack Switch Software Version and Stack Switch Model for
all switches in the stack.
AT-8400
PN 613-50665-00 Rev C Page 68 of 294