Allied Telesis AT-VIEW PLUS 3.2 DEVICE MANAGEMENT - Manual (Page 232)

Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Port Trunking
Basic Info
Displays basic information about port trunking.
Trunk Config
Displays port trunking parameteres and allows configuration of the master port, member
ports, trunk type and trunk status.
Note - The current firmware version does not allow the Member Ports and Trunk Type
parameters to be configured.
Aggregator Info
Displays information about every Aggregator that is associated with this system.
Note - The current firmware version returns 'noSuchName' for the Aggregate Index
parameter.
Note - The current firmware version does not allow the Actor System Priority and
Collector Maximum Delay parameters to be configured.
Aggregator Port List
Displays the Link Aggregation Control information about every Aggregation Port
associated with this device.
Note - The current firmware version returns 'noSuchName' for the Port Index parameter.
Note - The current firmware version does not allow the following parameters to be
configured:
o Actor System Priority
o Partner Administrative System ID
o
Actor Port Priority
o
Partner Administrative Port
o
Partner Administrative Port Priority
Note - Setting the Actor Administrative Status parameter and the Partner Administrative
Status parameter to 'lacpActivity' or 'lacpTimeout' will result in the same hex value of
'6C'. On the other hand, setting them to 'distributing' or 'defaulted' will result in the same
hex value of '64'.
LACP Statistics
Displays the Link Aggregation information about every port that is associated with this
device.
Note - The current firmware version returns 'noSuchName' for all parameters under this
sub-menu option.
PN 613-50665-00 Rev C Page 232 of 294