Allied Telesis AT-SBx31CFC960 - Manual (Page 77)

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
77
USB Port
The USB port is used for the following management functions:
 Store backup copies of the master configuration and database files
on the AT-SBx31CFC960 Controller Fabric Card to a USB flash
memory drive.
 Transfer configuration files between controller cards in different
chassis that are to have similar configurations.
 Transfer application load files between controller cards.
 Store streaming log files.
A USB flash memory drive is optional. The AT-SBx31CFC960 Controller
Fabric Card can operate without a flash drive.
For ordering information, contact your Allied Telesis sales representative
or visit our web site.