Allied Telesis AT-SBx31CFC960 - Manual (Page 205)

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
205
software. The same LED on the inactive LED continues to flash amber
until it has synchronized its database with the active controller card, at
which point it turns solid amber to indicate the inactive state of the card.
However, the inactive card is forwarding traffic over the backplane.
Using the Console
Port to Monitor
the Initialization
Process
Another way to monitor the initialization process of the chassis is to
connect a terminal or PC with a terminal emulator program to the Console
port on the controller card and watch the status messages. (The settings
for the terminal or terminal emulator program are found in “Using Local
Management to Verify the Chassis” on page 212.) Figure 148 here and
Figure 149 on page 206 illustrate the messages. The chassis has
completed phase 1 when it displays the “Username” prompt. To monitor
phases 2 and 3, log in to the switch and use the SHOW CARD command.
For instructions, refer to the Software Reference for SwitchBlade x3100
Series Switches.
Figure 148. Switch Initialization Messages
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
ATI 960G Central Fabric Controller Boot Loader
Version 18.0.g.01
Created on Wed 04/24/2013 at 10:50 AM
Copyright Allied Telesis Inc., 20012
VxWorks Version 6.9 for Freescale QorIQ P2040
BSP version 6.9
Copyright 1984-2011 Wind River Systems, Inc.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
********************************************************************
* Warning: The password for the bootrom is the system default.
*
The password should be changed to avoid a security risk.
********************************************************************
Press ^b to stop automatic loading of software image...
0
Automatically loading software image...
FPGA Version 1.7
Starting Application Software Loading
Attaching to Flash File System ... done.
/tffs/ - Volume is OK
Boot album is (current, attempt 1): 'cfc960_6.18.0.0.tar'
Checking Album's integrity...done