Allied Telesis AT-SBx31CFC960 - Manual (Page 115)

SwitchBlade x3106 Chassis Switch and AT-SBx31CFC960 Card Installation Guide
115
4. Check the model name, shown in Figure 59, to verify the module.
If you have the AT-SBxPWRSYS1 AC System Power Supply, do not
continue with this procedure. Instead, perform “Installing the AT-
SBxPWRSYS1 AC System Power Supply” on page 107.
Figure 59. Verifying the AT-SBxPWRPOE1 AC Power Supply
5. Raise the locking handle on the AT-SBxPWRPOE1 AC Power Supply,
as shown Figure 60.
Figure 60. Raising the Handle on the AT-SBxPWRPOE1 AC Power
Supply
6. Align and insert the AT-SBxPWRPOE1 Module into slot A or B. Figure
61 on page 116 shows the power supply being installed in slot A.
Caution
The AT-SBxPWRPOE1 AC Power Supply will not work in slot C or
D.