Samsung SPH-M580ZKASPR User Manual
Page 32
18
Speaker
– Speakerphone feature is enabled.
Battery Strength
– Shows your current battery
charge level. (Icon shown is fully charged.)
Battery Low
– Shows your current battery
charge level is very low.
Device Power Critical
– Shows your current
battery only has five percent power remaining
and will immediately shutdown. Represented as
a blinking icon.
Bluetooth Active
– Bluetooth technology is
active and enabled.
Bluetooth Connected
– Bluetooth technology is
active and communicating with an external
device.
GPS Location On
– Device location feature is on
and available for location-based services such
as GPS Navigation (see page 184).
GPS Communicating
– Device location feature is
on and communicating.
Status Bar – Status Icons
Wi-Fi Connected
– Wi-Fi is connected, active,
and communicating with a Wireless Access
Point (WAP).
Wi-Fi Connection Issue
– Wi-Fi is active but there
is a communication issue with the target
Wireless Access Point (WAP).
Sprint Hotspot Active
– The Sprint Hotspot
feature has been activated (page 154).
microSD Unmounted
– The External SD card
(internal microSD) has been disconnected
(unmounted) from the device and is now ready
for either removal or formatting.
Preparing for Mounting
– The External SD card
is being prepared for mounting to the device.
This is required for communication with the
External SD card.
USB Connection
– The device has detected an
active USB connection.
USB Debug Connection
– The device has
detected an active USB connection and is in a
USB Debugging mode.
Status Bar – Status Icons
SPH-M580.book Page 18 Thursday, January 12, 2012 2:53 PM