Samsung OPH-D700ZKMSPR - Manual (Page 91)

2C. Settings 77
Setti
ngs
Vibrate
To set your device to vibrate for incoming calls and silent
for notifications:
ᮣ
Press the volume button down in standby mode
until you see
on the screen.
To set your device to always vibrate for incoming calls:
1. Press > and tap > Sound .
2. Tap
Vibrate
. (If you have already checked the
option, tapping it again deselects the option.)
To set your device to vibrate while using the dialpad: and
making onscreen selections
1. Press
>
and tap
> Sound
.
2. Tap
Haptic feedback
. (If you have already checked
the option, tapping it again deselects the option.)
Ⅲ
This provides a physical feedback when
interacting with the onscreen options.
To set the vibration intensity on your device:
1. Press
>
and tap
> Sound
.
2. Tap
Vibration intensity
.
3. Touch and drag the onscreen slider to adjust the
intensity level, and tap
OK
.
Silence All
The Silence All option allows you to mute all sounds
without turning your device off (except for Media
volume).
To activate Silence All:
ᮣ
Press and hold the volume button down in standby
mode until you see on the screen.
To deactivate Silence All:
ᮣ
Press the volume button up repeatedly to select a
volume level.
To set your device to silent mode:
1. Press
>
and tap
> Sound
.
2. Tap Silent mode . This option silences all audio on
the device except for media and alarms. (If you
have already checked the option, tapping it again
deselects this option.)
SPH-D700.book Page 77 Thursday, December 9, 2010 10:22 AM