Before you begin – Samsung OPH-D700ZKMSPR User Manual
Page 150
136
Before You Begin
Here is what you will need to have before you can
successfully establish a connection between your Epic
4G and a computer.
ⅷ
microSD card (internally installed prior to start)
ⅷ
compatible USB cable (included)
1.
With the microSD card installed, connect your
device to your computer using a compatible USB
cable. (Wait for the connection to be completed.
When connected, the host computer will
automatically detect your device.)
2.
The USB icon (
) now appears in the top left
Notifications area on your device.
3.
Tap
Mass Storage
from the
Select USB mode
screen.
Ⅲ
Charging
uses the connected USB cable to
charge the device via your computer’s USB port.
Ⅲ
Mass Storage
uses the connected USB cable to
provide data communication between the device
and your computer. The device then appears as
an external drive with its own drive letter.
Ⅲ
Tethered Mode
allows your computer to obtain an
external data connection by using the device’s
wireless data services and a wired USB
connection. Choose from
3G tethered mode
or
4G tethered mode
.
●
Go to samsung.com and visit the D700
Product page, where you can navigate to
Support
tab
> Downloads
to obtain this driver.
●
AQ
also provide detailed
information about this driver.
●
A wireless data connection can be done by
using the device’s Sprint Hotspot feature
4.
Touch and drag down the Status screen to reveal
the Notifications page (or from the Home screen
press
and tap
Notifications
).
Important:
If you are using your device for Tethering,
you may be prompted for additional
drivers.
The
Samsung Mobile Driver
for
SPH-D700 contains the ADB, CDMA, &
WiMAX drivers that are required for use of
either Tethering (Phone as a Modem) or to
utilize development tools.
SPH-D700.book Page 136 Thursday, December 9, 2010 10:22 AM