Innovate Motorsports LogWorks 3 - Manual (Page 6)

LogWorks3_Manual_1.01.doc - 6 -
1 Overview
LogWorks is a software application that interfaces with the Innovate Modular Tuning System
products. It enables easy analysis and manipulation of engine data acquired by MTS components
and also allows to view engine data in real-time on the on-screen virtual gauges.
This manual describes the basics of data logging with the Innovate Modular Tuning System and
how to use the LogWorks 3.0 Program. In addition this manual shows how you can extend the
capabilities of the MTS with some basic electronic skills.
1.1 Specifications
Computer Requirements
Operating System
Windows 98 or later
Computer speed 600MHz Pentium 1 or faster
RAM Min. 100 Mbyte more than recommended for the
operating system
Hard Disk space Min. 100 Mbyte free space
Display Thousands of colors, 800 x 600 Min.
Other 1 free serial port or USB to serial adapter
LogWorks 3 Limits
Max. Session Size
1 hr 30 minutes
(65536 sample sets at 0.08192 sec/set)
Max. Number of sessions per log 1024
Max. Number of logs open 32 open concurrently
Max. Number of value channels 64
Max. Number of bit channels 32
Max. Number of channels total 96