Innovate Motorsports LogWorks 3 - Manual (Page 58)

LogWorks3_Manual_1.01.doc - 58 -
6.6 Selecting Representation of the Mixture
Mixture data from one ore more Wideband sensors acquired with an LM-1 or LC-1 can be shown
as air-fuel-ratio (AFR) or Lambda.
To show the mixture as Lambda or AFR select:
Channels->Show Mixture as Lambda to show it in Lambda or
Channels->Show Mixture as AFR to show air-fuel-ratio
Either setting does NOT change what LogWorks recorded, it changes just the display unit.
Internally LogWorks records always Lambda data.
For display purposes it multiplies Lambda with the stoichiometric setting for the selected fuel.
When mixture data is shown as AFR, you can select the fuel type with
Channels->Set Fuel Type-> …
When selecting
Channels->Set Fuel Type->Use device Settings
LogWorks will use whatever is programmed as fuel type in the first wideband device in the MTS
chain and applies that to all wideband channels.
6.7 And Further
6.7.1 LogWorks Main Window Menu
Use this menu to quickly switch between open logs.
6.7.2 Help Menu
Open this Manual, Show LogWorks Version Number and Copyright and/or go to the Innovate
Motorsports home Page.