Innovate Motorsports LogWorks 3 - Manual (Page 29)

LogWorks3_Manual_1.01.doc - 29 -
The dialog box contains multiple fields. For bit channels, only field 1 and possibly field 3 and 4 are
shown.
Field 1.
In field one you can specify a name for the input for easy identification.
Use a unique name.
Only letters, numbers and the underline character _ are allowed in an input name.
A channel name may not start with a number.
If multiple channels measure similar data, like multiple EGT or Lambda/AFR channels,
name them with a number at the end like:
AFR_CYL1, AFR_CYL2 and so on. This makes it easier for LogWorks to create channel
group names.