beautypg.com

Installing the 172 mm fans – HP Integrity rx4610 Server User Manual

Page 29

background image

Chapter 3

Installing Fans and Power Supplies

21

LED Indicator

Figure 3-1. Removing the 172 mm Fans

Installing the 172 mm Fans

To install the 172 mm fan, complete the following procedure:

1. Lift the latch on the fan-access door and open the door.

NOTE

Verify the connector orientation prior to installing the new fan.

2. Slide the new fan into place with the connector oriented to engage the

socket inside of the fan enclosure.

3. Push the fan assembly firmly into the enclosure to seat the connector.

4. Close the fan-access door and engage the latch by pushing it downward.

5. Slide the chassis back into the rack.

See also other documents in the category HP Computer hardware: