HP Integrity rx4610 Server - Manual (Page 107)

Chapter 8 Server Management Boards
99
Figure 8-7. Removing the Power Distribution Board (T-Docking)’s Top
Bracket
10. Remove the 12 V DC-DC converter from the top of the Power Distribution
Board (T-Docking).
11. Remove the fan, DVD, and floppy drive cable power connector from the
Power Distribution Board by squeezing the lock tab and carefully pulling
the connector upwards.
12. Loosen the two top captive screws from the AC Power Distribution
Bracket. Lift the AC distribution bracket out of the way and disconnect the
AC input cables from both connectors.