HP Integrity rx4610 Server - Manual (Page 186)

Chapter 11 Troubleshooting
178
8C92: DIMMs mapped out: Lower Board, 9 - 12
8C93: DIMMs mapped out: Lower Board, 17 - 20
8C94: DIMMs mapped out: Lower Board, 25 - 28
8C95: DIMMs mapped out: Lower Board, 5 - 8
8C96: DIMMs mapped out: Lower Board, 13 - 16
8C97: DIMMs mapped out: Lower Board, 21 - 24
8C98: DIMMs mapped out: Lower Board, 29 - 32
8C99: DIMMs mapped out: Upper Board, 1 - 4
8C9A: DIMMs mapped out: Upper Board, 9 - 12
8C9B: DIMMs mapped out: Upper Board, 17 - 20
8C9C: DIMMs mapped out: Upper Board, 25 - 28
8C9D: DIMMs mapped out: Upper Board, 5 - 8
8C9E: DIMMs mapped out: Upper Board, 13 - 16
8C9F: DIMMs mapped out: Upper Board, 21 - 24
8CA0: DIMMs mapped out: Upper Board, 29 - 32
FFFE: Invalid Error Number
FFFF: Reached Termination during Error Processing
Beep Codes
Beep Codes and Interpretation
Speaker beep code generation is supported on standby and when the system is
powered up. The BMC may emit the beep codes listed in the table below. The
waveform below describes the timing and the sequence of the Beep code 1-5-1-1--
-1 for power supply configuration failed to retain 3+1 redundancy.