Hp server rx4610 event description codes – HP Integrity rx4610 Server User Manual
Page 180
Chapter 11
Troubleshooting
172
2F
Upper Memory Board Fan Boost Temperature
30
Lower Memory Board Fan Boost Temperature
31
Sideplane Fan Boost Temperature
32
I/O Board Fan Boost Temperature
33
Processor Board 1 Fan Boost Temperature
34
Processor Board 2 Fan Boost Temperature
35
TeeDock Board Fan Boost Temperature
HP Server rx4610 Event Description Codes
The purpose of the Event Description field varies, depending on the Generator ID.
When the Generator ID is:
1.
20
00
2.
28
00
3.
C0
00
The first byte of the Event Description is used to indicate the type of event that
occurred, such as the crossing of a threshold or the removal of a device.
Event Description
Event Type
Definition
01 — — —
N/A
Threshold crossed
02 — — —
N/A
Transition to idle, active, or busy
03 — — —
N/A
State asserted or deasserted
04 — — —
N/A
Predictive failure asserted or
deasserted
05 — — —
N/A
Limit exceeded
06 — — —
1
N/A
Performance
lag
07 — — —
1
N/A
Presence, Disabled, IERR,
Thermal Trip, or FRB3
08 — — —
N/A
Device added or removed
09 — — —
N/A
Device enabled or disabled
0A — — —
N/A
Transition to running or test, on or
off-line
1
The PHP sensors will have an Event Description beginning with either E6 or E7 with an offset of 00
or 05 (hexadecimal view). This may be translated as follows: