HP Integrity rx4610 Server - Manual (Page 13)

Chapter 1 Controls, Ports, and Indicators
5
SCSI Hard Drives
The server supports up to two hot-swap drive carriers containing standard 1-inch
high by 3.5-inch-wide LVDS SCSI hard drives. As part of the hot-swap
implementation, drive carriers with integral heat sinks house the drives. Each
drive is mounted in a carrier with four fasteners and the carrier snaps into the hard
drive bay. When a carrier is seated properly in the bay, it snaps into place and
leaves the locking handle exposed to the front of the chassis. Drives can consume
up to 24 watts of power and must be specified to run at a maximum ambient
temperature of 40
° C (104 ° F).
LCD DISPLAY
P OW ER
P WR P WR A C TI V E A C TI V E F AI L F AI L
R E S ET I N T S Y S P W R P WR F AN GE N
LCD DISPLAY
POWER
PW R PW R ACTIVE ACTIVE FAIL FAIL
RESET INT SYS PW R PWR FAN GEN
Power LED
Drive Active
Failure LED Power LED
Drive Active
Failure LED
Figure 1-4. SCSI Drive Indicators on the Front LED Panel