HP Integrity rx4610 Server User Manual
Page 128
Chapter 10
Configuring the HP Server
120
EMP Feature
Description
Modem ESC
Sequence
The Modem ESC Sequence string is sent to the modem
before sending a command string to the modem. The
maximum length is 8 bytes and it is usually set to "+++".
Modem Phone
Number
Enter the phone number of the modem connected to this
server. The maximum length is 32 bytes. The Modem
Phone Number can be retrieved and reported via in-band
management connections.
Set Password
If set, this password restricts EMP access through the
direct serial connection or modem. Select the Set
Password button to display the password setup page for
clearing or setting the password. You must select
in the previous setup page to clear or set the
new password to the BMC.
Valid characters for this password are A-Z, a-z, and 0-9.
The maximum line-length allowed is 16 characters.
The password setup page consists of two edit boxes, one
to enter a password, another to confirm, and an
button. If a password already exists, both of the edit
boxes display "********". To clear the old password,
clear both edit boxes by selecting each box and pressing
the
the new password in both of the edit boxes. Select the
button when done to go back to the previous setup
page.