HP Integrity rx4610 Server - Manual (Page 22)

Chapter 2 Opening and Closing the HP Server
14
Figure 2-1. Removing and Replacing the Front Bezel
Removing and Replacing the HP Server’s
Main Cover
The server comes with a removable top cover. Removal of this cover is necessary
when installing or removing many components. You do not have to remove the
top cover when removing or installing PCI hot plug and non-hot plug adapter
boards, the Legacy I/O board, fans, hard drives, power supplies, or components
inside the Processor/Memory Complex.
WARNING Before removing the cover, always disconnect the power cord
and unplug the Ethernet cables. Disconnect the power cord to
avoid exposure to high energy levels that may cause burns
when parts are short-circuited by metal objects such as tools
or jewelry.
Make sure that the rack is anchored securely so that it does not
tip when the server is extended from the rack.