HP Integrity rx4610 Server - Manual (Page 209)

Appendix A Specifications
201
Table A-3. Weight and Dimensions
Weight Approx. 150 lbs (68.1 kg.), depending on
configuration – excludes keyboard and monitor.
Height 31.12 cm (12.25 inches, 7U)
Width 44.45 cm (17.5 inches)
Depth 71.12 cm (28.0 inches)
Required front
clearance 7.62 cm (3 inches)
Required rear
clearance 20.32cm (8 inches)
Heat Dissipation 6174 BTU/hr
Table A-4. HP Server Hardware Specifications
Processors Up to four 733 MHz/2 MB or up to four 800 MHz/ 4 MB Intel
Itanium processors, packaged in Slot M pin array cartridges.
Chipset
QLogic chip set with 66/133 MHz bus speed support
Memory Two plug-in boards containing main memory supporting PC100
Version 1.2 buffered SDRAM. DIMM sizes supported are 256
MB, 512 MB, and 1 GB. Each memory board supports from 1
GB to 32 GB of error correction code memory using 32 72-bit
dual inline memory modules. The boards interface to the
processors via connectors on each side of the processor board.
Video ATI RAGE XL super video graphics array controller with 16
MB of video memory.
SCSI The Qlogic ISP 12160 LVDS embedded dual channel controller
supports the internal SCSI drives and is connected to the SCSI
backplane; the second LVDS channel is routed to the rear of the
server to support external devices.
IDE
Contained on the Legacy I/O Board, the two IDE buses support
the diskette drive on Primary IDE 0 and the DVD drive on
Secondary IDE 1.
PCI Bus Eight 64-bit/66 MHz Hot Plug PCI I/O expansion slots.
Two 64-bit/33 MHz PCI expansions slots.