HP Integrity rx4610 Server - Manual (Page 121)

Chapter 10 Configuring the HP Server
113
Command Description
mkdir dir [dir] Makes a directory
mm address [Width] [;Type] Memory Modify: Mem, MMIO, IO, PCI
mode [col row] Sets or gets the current text mode
mount BlkDevice [sname[:]] Mounts a file system on a block device
PalProc arg1 [arg2] [arg3] [arg4] Makes a PAL call
pause
Prompt to quit or continue (scripts only)
pci [bus_dev] [func] Displays PCI device information
reset [/warm] [reset_string] Performs a cold or warm reset
rm file/dir [file/dir] Removes files or directories
set [-bdv] [sname] [value] Sets or gets environment variables
stall microseconds Delays for the specified number of
microseconds
time [hh:mm:ss] Gets or sets the time
type [-a] [-u] [-b] file Displays the contents of a file
ver Displays version information
vol fs [volume_label] Sets or displays a volume label
Server Management Configuration Utility
The Server Management Configuration Utility (SM Config) is an EFI-based
program used to view or modify the Server Management firmware configuration
data. The firmware configuration is maintained by the BMC. The executable
program for the utility is named SMconfig.efi. SM Config provides the following
functions:
• Configure the Emergency Management Port (EMP) for remote server
management over a modem or direct serial connection.
• Configure the Direct Platform Control over LAN feature (DPC\LAN) for
remote server management over the network.
• Configure power restoration policies when the system loses AC power.
• Set the accelerated cool-down timeout.
• Set the Fault Resilient Boot (FRB) timeout.
• Configure the Advanced Configuration and Power Interface (ACPI)
features.
• Enable or disable Platform Event Filtering (PEF) and Platform Event
Paging (PEP).