HP Integrity rx4610 Server - Manual (Page 16)

Chapter 1 Controls, Ports, and Indicators
8
Rear View
The ports and connectors at the rear are listed below and shown in Figure 1-6.
Figure 1-6 provides a detailed view of the Legacy I/O panel that resides in the
upper-right corner of the rear panel.
• The power connector accepts a standard power cable to connect the
HP Server with the site power supply.
• Ten PCI add-in board expansion slots are available. Eight are hot plug and
two are non-hot plug.
• Each hot plug PCI has status LEDs.
• The mouse port accepts a standard mouse with a PS/2 connector.
• The keyboard port accepts a standard keyboard with a 6-pin PS/2
connector.
• Two USB ports, 0 and 1, with 4 pin connectors are provided for printers,
scanners, and external modems.
• The LAN port is included as an embedded controller based on Intel's
82559 10/100 BaseT Fast Ethernet controller. It has a RJ-45 LAN
connector and two LEDs to indicate LAN speed and valid connection.
• The two Serial Ports are standard 9-pin RS-232 connectors.
• The Parallel Port is a standard PS/2 compatible parallel port with a 25 pin
bi-directional subminiature D connector.
• There are two Interchassis Management Bus (ICMB) connectors, ports 1
and 2.
• The 15 pin video connector is Super VGA compatible.
• The optional external SCSI port provides access to external SCSI devices.