HP Integrity rx4610 Server - Manual (Page 136)

Chapter 10 Configuring the HP Server
128
BIOS Setup Advanced Screen Menu Items
Primary Menu
Item
Sub Menu
Items Value
Description
IDE
Configuration IDE Controller
[Both]
Disabled
Primary
Secondary Selects the IDE controller
and hard disk drive type
installed in your system.
Both enables both IDE
controllers. Disabled
disables the integrated
IDE controller. Primary
enables only the primary
controller. Secondary
enables only the
secondary controller.
Hard Disk
Pre-Delay
[Disabled]
3, 6, 9, 12, 15,
21, 30 Seconds
Enabled selects the hard
disk drive pre-delay. This
causes the BIOS to insert
a delay before attempting
to detect IDE drives in the
system. Disabled disables
the pre-delay.
Primary IDE
Master
[drive_id]
Not Installed A drive-specific identifier
for the primary IDE
master device currently
installed in the system.
Clicking on the value
displays two subsequent
sub-menu items: Type
and Use ARMD Drive
As. Type specifies how
the server perceives the
device (automatically or
as an ATPI device). Use
ARMD Drive As
specifies how to use the
device (floppy or hard
drive).