HP Integrity rx4610 Server - Manual (Page 125)

Chapter 10 Configuring the HP Server
117
Advanced Configuration Power Interface (ACPI) Setup
ACPI Setup provides the ability to configure the ACPI features described below:
ACPI Feature Description
Button Model Sets the power and/or sleep button model used by the
system:
• Power Button Only. The system supports a
single power button.
• Power and Sleep Buttons. The system
supports both power and sleep buttons.
State Notify Specifies whether other server management
controllers in the system will be notified upon
ACPI power state changes:
• Enable. Enables notification.
• Disabled. Disables notification.
Fan Control Controls fan operation when the system enters the S1
sleep state:
• Do Not Stop Fans. Fans continue to run when
the system enters a sleep state.
• Stop Fans. Stops fans on a sleep state.
Platform Event Filtering (PEF) Setup
Platform Event Filtering is used to configure the actions taken when certain
platform events occur. You must select in the PEF Setup page to actually
set the filter entries.
The available event filters are:
PEF Feature Description
PEF Enable Enables or disables Platform Event Filter (PEF).
Logging Enable Enables or disables system event logging when an event
filter is triggered.
PEP Actions Enables or disables Platform Event Paging (PEP) actions
when an event filter is triggered. PEP sends a phone page
when an event triggers the filter.
Power Down Enables or disables system power down when an event
filter is triggered.