Language pack, Identifying the correct software for your product – HP StoreOnce Backup User Manual
Page 89
you upgrade software, there will be a welcome message in the Web Management Interface that
summarizes all the changes in this upgrade.
IMPORTANT:
Once you have upgraded your software, you will not be able to revert to the earlier
version. Always read the Release Notes accompanying the software upgrade carefully to check
that the upgrade is compatible with your configuration.
IMPORTANT:
Software can only be upgraded from a maximum of two previous revisions;
attempting to upgrade from a version any older will fail with an error message and the software
will not be upgraded. If you wish to upgrade from an older version, you must first upgrade to an
appropriate newer reversion, reboot and then upgrade again.
Software updates for all versions can be downloaded from
.
NOTE:
You may also receive notification of upgrades to system components, such as hard disk
drives and BIOS, from time to time, independently of upgrades to the HP StoreOnce Backup System
software. Use the Support page to check the current status of these components and determine
whether an upgrade is required.
Language Pack
The Language Pack contains all the translations for the Web Management Interface and messages
that are displayed when using it. This includes the online help.
Whenever new software is released, there may also be changes to the screens and messages. It
is, therefore, very important to make sure that these are downloaded at the same time as the
software is updated. The software upgrade removes all language packs, so a new language pack
is always required to get localized languages and ensure that everything is up to date.
Identifying the correct software for your product
It is important to select the correct software for your product. There are two generations of HP
StoreOnce Backup Systems. Sometimes it is easy to identify the generation from the model number,
sometimes it is less easy.
•
HP D2D2503i, HP D2D4004/4009i/fc are only available as G1 products
•
HP D2D4106i/fc and HP D2D4312 are only available as G2 products
•
HP D2D2502i, HP D2D2504i and HP D2D4112 are available as both G1 and G2 products
The generation can be identified from the Summary page and the Software page of the Web
Management Interface. Look at the Type field, which will state G1 or G2 or look at the Software
Revision field. If it shows 1.x.xx software, it is a G1 product; if it shows 2.x.xx software, it is a G2
product.
Software (Administration)
89