HP StoreOnce Backup - Manual (Page 140)

Figure 32 RAID tab with RAID status warning (HP D2D4300/4100 Series)
To find out which physical disk has failed and its location, look at the Shelves tab. Use the Beacon
function on the Storage-Shelves page to locate the physical disk in the shelf.
Figure 33 Identifying the failed disk(s) (HP D2D4300/4100 Series)
If you have a system console
The optional system console is a useful tool for monitoring disk status. If you have connected a
system console, as described in the Installation and Configuration Guide, an Attention message
is displayed against the RAID Status Level if a disk fails and the failed disk can easily be identified
in the RAID section.
NOTE: The system console is password protected. It uses the same password as the Web
Management Interface.
140 Hard disk replacement