HP StoreOnce Backup - Manual (Page 42)

5. Click Credentials…, select the SNMP tab and type in the Read community string. This should
be the same as the Read Community string on the SNMP page of the Web Management
Interface. If you are using the default setting that allows everyone on the network to read the
reported alerts, enter “public”. Click OK to confirm.
6. Click Save to save the discovery rule.
7. To start the discovery process click Run Now.
NOTE: If a firewall is in operation on the machine running HP Systems Insight Manager,
make sure the HP StoreOnce Backup System(s) are within the firewall.
42 Appliance Configuration