Shelves – HP StoreOnce Backup User Manual
Page 51
This identifies the RAID card and port to which the shelf is connected, if you have highlighted
an external shelf in the RAID controller list.
Shelf:
This is the size of the logical unit.
Size:
Shelves
This page shows the status of the shelves and the physical disks. You can also use it to beacon a
disk within the StoreOnce Backup System. The Beacon LED on the front of the individual disk flashes
Blue.
Shelves
Click on a shelf (it is highlighted in blue) to display the disks located in that shelf in the Physical
Disks section.
This is the shelf number.
HP D2D4100 Series: Shelf 0 is the HP StoreOnce Backup System; Shelf 1 is the Capacity
Upgrade Kit, if installed.
Shelf:
HP D2D4300 Series: Internal refers to the HP StoreOnce Backup System. Additional shelves
show the card slot and port number to which they are attached. These Backup Systems may
have up to 3 additional shelves.
In normal operation, this shows green, OK. If one or more disks fail, it shows a failed icon
and a message. The disk should be replaced as soon as possible. See
for more information about replacing the disk.
Status:
This indicates whether the shelf has been configured. It is shown as not configured if it is
not yet part of the storage pool.
Configuration State:
The number of available physical disks in the shelf including the online spare disk.
Disks:
Storage (Status)
51