Best practices for using this feature, How is a target library made visible – HP StoreOnce Backup User Manual
Page 17
Best practices for using this feature
WARNING!
If you do not follow these best practices, unstable and possibly damaging results
may occur. Cartridges may be marked as unusable or the backup application may attempt to write
to target cartridges.
•
Ensure that no replication jobs to the selected target cartridge are in progress
•
Ideally check that no backup jobs to the mapped source cartridges are scheduled
•
Ensure that the backup application media server instance to be used is not within the same
cell/domain that can access the source cartridge
•
Import the data on the target cartridge into the backup application (this operation must be
repeated after each replicate operation to the cartridge)
•
Perform the desired operation on the cartridge, which may be:
Verify the cartridge using the backup application either using a verify command or by
performing a restore
◦
◦
Copy the cartridge to a physical tape device connected to the media server
How is a target library made visible?
1.
Create the replication mapping, as normal. See
Running the replication wizard (NAS) (page 69)
or
Running the replication wizard (virtual tape devices) (page 61)
, as appropriate.
2.
From the host that has access to the target library, on the Virtual Tape Devices-Devices page
select the target library in the Devices list.
3.
Click Edit.
4.
The Port defaults to None. Select an iSCSI or FC port, as appropriate.
5.
If you have selected an iSCSI port, enter the iSCSI Initiator Name.
6.
Click Update.
7.
Now you can make the target library visible from other hosts. For iSCSI devices, log on to the
target library using the ISCSI Initiator. For FC devices, configure the FC fabric to make the
host visible. Target visibility persists even if the power fails or if the replication mapping is
removed.
NOTE:
To remove target visibility, simply reset the Port to None. You will lose the iSCSI Initiator
Node Name and must reenter it to reinstate target visibility.
Making Replication Target libraries visible to the host
17